Ingerclima — automatic slatted pool covers
+34 91 631 59 40 Get a Quote
Automatic slatted pool cover rolling open on a private villa pool in Benalmádena Costa
Costa del Sol · Málaga

Automatic pool covers in Benalmádena

Spanish manufacturer of motorised slatted pool covers, built in our own workshop and fitted in Benalmádena by our own team — with a depot in nearby San Pedro de Alcántara, Marbella.

Automatic pool covers made and fitted by Ingerclima in Benalmádena

Ingerclima is a Spanish manufacturer of automatic pool covers: motorised slatted blinds, in PVC or polycarbonate, that float across the surface of the water and roll away at the touch of a switch. We are the manufacturer and the installer, so there is no middleman between you and the finished job. Everything is built in our own workshop in Torrijos (Toledo) and fitted by our own technicians, who travel to Benalmádena from our depot in San Pedro de Alcántara, Marbella — around 35 minutes up the A-7. With more than 20 years of experience and over 5,000 installations across Spain, we cover villas, townhouses and gated communities throughout Benalmádena Costa, Arroyo de la Miel and the Pueblo. Every cover is motorised; there is no manual option.

20+
years in the trade
5,000+
covers installed
100%
made in our own Spanish workshop
NF
P90-308 safety standard

Why choose Ingerclima

One team from workshop to installation

We manufacture and install with our own staff — no subcontractors on your Benalmádena pool. Our fitters come directly from our San Pedro de Alcántara depot in Marbella, roughly half an hour along the coast, so booking a site visit or a follow-up is straightforward.

Short lead times, ready for the season

Because we control the whole process, fabrication takes around four to six weeks and installation just one to two days on site. Order in spring and your cover in Torrequebrada or La Capellanía is working before the Costa del Sol summer gets under way.

Our own technical service on the coast

Many Benalmádena homes are second residences or expat-owned and stand empty part of the year. Our own after-sales team looks after servicing, replacement slats and motor repairs directly, without you having to chase a third party.

Where we install in Benalmádena

From the seafront urbanisations of Benalmádena Costa to the hillside plots above Arroyo de la Miel and the Pueblo, we fit automatic covers on private pools across the whole municipality. These are some of the areas we regularly work in:

Gated developments and resorts: we work across postcodes 29630, 29631 and 29639 and install routinely in gated developments and resorts such as Reserva del Higuerón and Torrequebrada, coordinating access, working hours and use of communal areas in advance with the concierge, the security team or the community administrator.

Benalmádena's climate and the right slat for your pool

Benalmádena enjoys one of the mildest climates in Europe, with more than 320 days of sunshine a year and gentle Mediterranean temperatures. Even so, the comfortable swimming season really runs from around June to October, when the sea and unheated pools sit above 20 °C. For the rest of the year most private pools go unused — and an automatic cover is what changes that.

PVC slats are the most economical and robust choice, and they suit the majority of villas and townhouses across Arroyo de la Miel, Torremuelle and La Capellanía. They cut down evaporation during the dry Costa del Sol summers, keep leaves, dust and insects out of the water, reduce your use of chemicals and top-up water, and hold in warmth overnight so the pool is ready to use the next morning.

Solar polycarbonate slats go a step further: they capture Benalmádena's abundant sunshine and pass that heat into the water, gently raising its temperature and extending your bathing season into spring and autumn. They are an excellent fit for the sun-exposed hillside plots around Montealto and El Higuerón, where south-facing pools get long hours of direct light.

Transparent polycarbonate slats are the most discreet and elegant option, chosen for design-led homes in Puerto Marina, Reserva del Higuerón and similar developments where the look of the pool matters. Whichever slat you choose, a floating cover also limits accidental access to the water — a real advantage for families and for second homes left unattended for part of the year.

See all our options in Cover models and Slat types.

Recent installations

See more in the gallery →

How many months can you swim in Benalmádena?

With an automatic cover, a pool in Benalmádena is ready from May to November. Without one the water only obliges in peak summer: what the sun puts in by day goes out at night.

The cover does two things at once: it stops evaporation, which is where most of the heat goes, and if you choose solar polycarbonate slats it lets the sun through and warms the water underneath at no running cost. And to hold the same temperature right through the season, a heat pump with a cover in place uses 50-60 % less energy.

What owners say once the cover is in

4.7 15 Google reviews See them on Google →
SR

Santiago R.

“As my wife rightly says — how lucky we were to find this company. They have done a flawless job because they genuinely know their trade. They know covers, which is what they make and sell, and on top of that they are good people. Thoroughly recommended.”

Google review · translated from Spanish
JC

Julia C.

“The cover is made from excellent materials and the finish is flawless. From the very first contact the service was outstanding and highly professional. They delivered everything they promised and the result exceeded my expectations. I would recommend them without hesitation.”

Google review · translated from Spanish
T

Teresa

“From the first phone call with the office through to the fitters on the last day, everything was spot on: professional, punctual and tidy. It is a pleasure to find companies that still work like this.”

Google review · translated from Spanish
GR

Giuliana R.

“Excellent pool cover. Everything was good, from the advice to the installation. The cover is very well made, works beautifully and keeps the pool clean and protected. We are delighted with it and would certainly recommend them.”

Google Local Guide · translated from Spanish
EV

Eva V.

“Thoroughly recommended. We are delighted with the cover they fitted for us. The service has been excellent from the very first moment, advising us at every step of the process.”

Google review · translated from Spanish

Frequently asked questions

Do you really travel to Benalmádena, or do you work through a local reseller?

We come to you directly with our own team. We manufacture the covers in our workshop in Torrijos (Toledo) and install them ourselves from our depot in San Pedro de Alcántara, Marbella, about 35 minutes from Benalmádena along the A-7. There is no intermediary — the people who build your cover are the same company that fits it and services it afterwards.

Which type of cover works best for Benalmádena's climate?

For most owners on the Costa del Sol we recommend solar polycarbonate slats, which use the strong local sun to warm the water and stretch the season into spring and autumn. If budget and durability are the priority, PVC slats are the sensible choice; if you want the most discreet look, go for transparent polycarbonate. All three are fully motorised — we do not offer a manual version.

How long does it take, and what about maintenance later on?

Fabrication usually takes four to six weeks and the on-site installation just one to two days. Day to day the cover needs very little care beyond an occasional rinse. When something does need attention — a slat, the motor or a routine service — our own technical service handles it directly, which is especially useful for second-home owners who are away for part of the year.

Can a cover be fitted to a pool that is already built?

Yes, and that is the majority of what we do here. A concrete pool will normally take an automatic cover with no structural work: if there is room beside the water the roller sits submerged and out of sight, and if there is not, it sits visible on the coping. We confirm which applies at the free measuring visit.

Can you fit a cover to a communal pool for the whole community?

Yes. We build covers for large pools and work regularly with property administrators and residents' committees, supplying the technical documentation and NF P90-308 information that is usually required before approval. We schedule the installation outside the bathing season so the community is never left without its pool in summer.

Architects, contractors and developers in Benalmádena

We manufacture in our own workshop in Torrijos (Toledo), with the structure and all fittings in 316L stainless steel, and we carry out the installation ourselves. For a practice, a main contractor or a developer, the decision that really matters is taken at design stage: a recess for the submerged shaft has to be allowed for in the pool shell before any concrete is poured, whereas an automatic slatted cover brought in at the end of the build is normally resolved with a visible shaft resting on the coping. If the project is in Benalmádena and the client is yours, the relationship stays with you.

How we work with professionals Download the slat comparison (PDF) →

Ask for your Benalmádena pool cover quote

Tell us about your pool in Benalmádena and we will prepare a tailored quote, with no obligation. Call us on +34 916 315 940 or message us on WhatsApp at +34 675 651 156 — manufacturer and installer, direct from our Marbella depot.

Chat with us on WhatsApp