Automatic pool covers in Fuengirola

Motorised pool covers made in Spain, fitted in Fuengirola

Ingerclima has been designing, manufacturing and installing automatic pool covers since 2005, with more than 5,000 installations and over twenty years of experience. Every cover is a motorised slatted blind that floats on the surface of the water — there is no manual version. Because we are the factory and the fitting team at the same time, homeowners in Fuengirola deal with a single company from the first measurement to the final handover, with no intermediaries and no reseller mark-ups. Our workshop is in Torrijos (Toledo) and our Costa del Sol base is in San Pedro de Alcántara, Marbella, a short drive along the A-7 from Fuengirola.

Which pool cover suits Fuengirola's climate?

Fuengirola enjoys one of the sunniest microclimates in Europe, with more than 320 days of sunshine a year and a gentle Mediterranean pattern: mild, occasionally wet winters of around 11-18°C and hot, dry summers where highs sit near 29-30°C. Sea temperatures peak at roughly 24°C in August, so the natural swimming season runs comfortably from May to September.

What shortens that season is rarely the daytime heat but the cooler spring and autumn evenings, the coastal breezes that sweep in off the bay, and the fine Saharan dust and leaf litter that settle on an open pool. An automatic cover tackles all three at once: closed overnight it holds in warmth, cuts water evaporation and keeps the surface clean, letting you open the season earlier in spring and stretch it well into the autumn.

For most Fuengirola gardens we recommend the solar polycarbonate slat, which uses the abundant Costa del Sol sunshine to warm the water by several degrees and is the best choice for genuinely extending your bathing season. The PVC slat is the robust, economical option for owners who mainly want protection, cleanliness and lower upkeep, while the transparent polycarbonate slat offers the most discreet, high-end finish for the designer villas of Torreblanca del Sol and El Higuerón.

The cover also earns its keep in winter and whenever a second home stands empty. Closed over the pool it keeps out rain-borne dirt, pine needles and dust, so the water stays clear and maintenance drops sharply — a real advantage for the many British, Scandinavian and Belgian owners who are only in Fuengirola part of the year.

See all our options in Cover models and Slat types.

How many months can you swim in Fuengirola?

In Fuengirola, with the cover drawn at night, the swimming season runs from May to November. Without a cover you wait for high summer and pack it in as soon as the evenings cool.

What the cover gains, it gains by cutting evaporation, the main route by which an open-air pool loses heat. With solar polycarbonate the sun also warms the water under the slats at no cost. To keep the temperature whatever the weather there is the heat pump, which with a cover uses 50-60 % less.

Frequently asked questions

Do you travel to Fuengirola, and how long does the whole process take?

Yes. Our own team covers Fuengirola from our Costa del Sol base in San Pedro de Alcántara, Marbella, a short drive along the A-7. After an on-site measurement we usually manufacture the cover in four to six weeks and complete the installation in one to two days.

Which type of cover is best for Fuengirola's weather?

For most clients the solar polycarbonate slat is ideal, as it uses the strong Costa del Sol sun to warm the water and extend the season. PVC is the economical, hard-wearing choice, and transparent polycarbonate gives the most elegant look. Every cover is motorised — we do not offer a manual version.

What maintenance does the cover need, and is there local after-sales?

The covers need very little upkeep — an occasional rinse and a routine check of the mechanism. We provide our own technical and after-sales service on the Costa del Sol, so if you ever need a repair or an adjustment you deal directly with the manufacturer, not a third party.

We are a few hundred metres from the sea. How does that affect the cover?

It affects the hardware more than the slats. On coastal installations we use profiles and fixings rated for a marine environment, because salt and humidity go for the ironmongery first. It is the single biggest difference between a cover that still runs smoothly after ten years by the sea and one that does not.

Nobody is at the property for most of the year. How do we arrange everything?

Remotely, without any difficulty. We can measure with your keyholder or administrator present, send the quotation and drawings by email, and agree a fitting date that suits the property rather than your travel diary. We photograph the finished installation and send it over, and we deal with the after-sales directly with whoever holds the keys.

Architects, contractors and developers in Fuengirola

We manufacture in our own workshop in Torrijos (Toledo), with the structure and all fittings in 316L stainless steel, and we carry out the installation ourselves. For a practice, a main contractor or a developer, the decision that really matters is taken at design stage: a recess for the submerged shaft has to be allowed for in the pool shell before any concrete is poured, whereas an automatic slatted cover brought in at the end of the build is normally resolved with a visible shaft resting on the coping. If the project is in Fuengirola and the client is yours, the relationship stays with you.

Customer reviews

What owners say once the cover is in

4.7 15 Google reviews See them on Google →

Santiago R.

“As my wife rightly says — how lucky we were to find this company. They have done a flawless job because they genuinely know their trade. They know covers, which is what they make and sell, and on top of that they are good people. Thoroughly recommended.”

Google review · translated from Spanish

Julia C.

“The cover is made from excellent materials and the finish is flawless. From the very first contact the service was outstanding and highly professional. They delivered everything they promised and the result exceeded my expectations. I would recommend them without hesitation.”

Teresa

“From the first phone call with the office through to the fitters on the last day, everything was spot on: professional, punctual and tidy. It is a pleasure to find companies that still work like this.”

Giuliana R.

“Excellent pool cover. Everything was good, from the advice to the installation. The cover is very well made, works beautifully and keeps the pool clean and protected. We are delighted with it and would certainly recommend them.”

Google Local Guide · translated from Spanish

Eva V.

“Thoroughly recommended. We are delighted with the cover they fitted for us. The service has been excellent from the very first moment, advising us at every step of the process.”

Automatic Pool Covers in Fuengirola

Motorised pool covers made in Spain, fitted in Fuengirola

Why choose Ingerclima

Factory and fitters, no middlemen

A team already on the Costa del Sol

Short lead times, one clean install

Pool cover installation across Fuengirola

Which pool cover suits Fuengirola's climate?

Recent installations

How many months can you swim in Fuengirola?

What owners say once the cover is in

Frequently asked questions

Do you travel to Fuengirola, and how long does the whole process take?

Which type of cover is best for Fuengirola's weather?

What maintenance does the cover need, and is there local after-sales?

We are a few hundred metres from the sea. How does that affect the cover?

Nobody is at the property for most of the year. How do we arrange everything?

Architects, contractors and developers in Fuengirola

Learn more about our covers

Cover models

Slat types

Pool heating

Automatic pool covers in Spain

Where we install

What an automatic cover costs

Get a free quote for your Fuengirola pool cover